Preparing for a Photo Trip Part 2–What to Bring
This is part 2 of the series reposted from the old Web site.At one week out it's time to plan on exactly what to bring. This article goes through the process of deciding what is needed and what can be left at home.
What to Bring
Deciding on what to bring on a trip is one of the most important parts of the planning process. Bringing too much can make travel difficult and can lead to frustration on the shoot when it's hard to choose what to use. Leaving important pieces of equipment behind is equally bad when you miss critical shots due to the lack of the proper equipment.
I'll use the upcoming tours as an example of how I approach this planning process. First I create a list of all the potential shooting locations. For each of these I list what I expect to be shooting and any special considerations for that particular part of the shoot.
For the tours this is a list of the potential shooting locations and what I expect to photograph at each.
- Henderson Lake - Shooting is from a boat.
- Osprey in Flight
- Small and large birds
- Nesting Eagles
- Landscapes
- Macro shots of insects and flowers
- Large and Small Swamp Creatures - Alligators, Snakes, Beaver, Nutria
- Miller's Lake - Shooting is from a boat.
- Nesting Wading Birds
- Ducks, Rails, Smaller Wading Birds
- Landscapes
- Macro shots of flowers and insects
- Dauterive Lake _ Shooting is from a boat
- Landscapes
- Lake Martin - Shooting from boat, land and car
- Landscapes
- Small and Large Birds
- Large and Small Swamp Creatures – Alligators, Snakes, Nutria
- Macro Shots of insets and flowers
- Henderson and Miller's Lake:
- 600 mm f6.3 flight lens
- 1.4 X teleconverter
- 24-120 mm f4 lens
- Lake Dauterive
- 24-120 mm f4 lens
- 100-400 f4 lens
- Lake Martin and Lacassine National Wildlife Refuge
- 600 mm f6.3 lens
- 200-400 mm f4 lens
- 24-120 mm f4 lens
- Tripod
- Gimbal Head
- BH-55 Ball Head
- Two Camera Bodies
- Laptop
- Laptop Bag
- CFExpress Cards
- CFExpress Card Reader
- External Data Hard Drives
- Rapid Strap
- Small Camera Bag / Fanny Pack
- Pelican case
- 600 mm f6.3 lens
- 100-400 mm f4 lens
- 24-120 mm f4 lens
- 20 mm f 2.8 lens
- Tripod
- Gimbal Head
- BH-55 Ball Head
When shooting from a boat, I try to carry only what I'm going to use. Fumbling for equipment making shooting difficult and I do better when I have just what I need set up and ready to shoot. I like to carry the equipment in a bag or case that offers some water protection in case of spray when moving between shooting sites or rain. For all of the locations I'll need CFExpress cards, two camera bodies, and my Rapid Strap.
Consolidating Lists I will need the following Equipment:
Planning and Preparing for a Photo Trip–Part 1
Successful photo trips are dependent upon proper planning and preparation. This is Part 1 of a three part series on preparing for a Photo Trip. This was written many years ago and the equipment I use now is quite different then what I was using then. But the process is still the same.
One month prior to a trip
With my photo tours starting in April and with impending reconnaissance trips and my normal increased spring shooting schedule, I've been preparing for the shooting season and I thought it might be helpful for those of you planning for your peak shooting season or planning a major trip, to document how I handle this.
My first workshop begins on April 1st and I've started working on the things listed here for 1 month out. I've loaded these tasks in a software planning tool called OmniFocus, but entering them in a computer calendar or on an old-fashioned paper calendar would work just as well. The key is to start the process as early as possible to make sure you have no last-minute surprises.
My first priority is to make sure all my equipment is in proper working order and I get anything needing repair back to the service center for repair. All the camera equipment comes out of the bags and is put through its paces in the backyard, making sure all the lenses properly focus and produce sharp images. The camera bodies are checked and the tripods and heads are set up, and I make sure that they operate smoothly. All the repairs needed that I can accomplish I do myself, anything needing further help is sent off.
Everything gets a thorough cleaning. I vacuum out the bags and carefully clean the camera bodies, lens bodies, tripods, and heads. I clean each of the lenses using Zeiss Lens Cleaning Wipes, available at Walmart in the glasses section. My carbon fiber tripod is disassembled at each section, carefully cleaned and lubricated using the proper lubricant, and any damaged or enlarged bushings replaced.
All the camera options are checked and any changes to my workflow are thought through at this time and thoroughly tested prior to the shoot.
I thoroughly check out my laptop, run diagnostics, ensure all software is up to date, and make sure there are no hardware problems. I make sure that the hard drives are clear and has sufficient storage space for the shoot.
I check out each CFExpress / SD card by shooting a series of shots. My card reader is tested to make sure they properly read the cards and I import the shots into my photo software and make sure it's functioning properly.
If I am planning a major trip to a location I hadn't previously visited, I spend time online researching the location. I also check on articles in photo magazines as well as contact photographer friends who have visited the site. I am interested in finding out as much as possible about the peak season, the best time of day, and unusual opportunities or any challenges of the location. This information would be filed away on my laptop for access when I arrive at the shoot.
For my tours each year I do a reconnaissance trip, leaving very early one morning and visiting nearly all of the sites in one very long day to make sure we'll get no unpleasant surprises when visiting the site. I also call other photographers seeking information specific to each year.
Thinking about the planned itinerary and the subjects I expect to be photographing, I create a list of equipment to bring. I try to make sure I have everything I'll need, but no more. Usually, the more equipment I have the poorer the shots I come back with. I don't want to have to carry too much, but I don't want to miss the best shots. If flying, I try to find ways to double up equipment to reduce the size and weight, for example, if planning on some macro shooting, I'd bring an extension tube rather than a macro lens. I'd consider if I need both a 300 mm lens and an 80-200 mm zoom; perhaps the 80-200 with a teleconverter would suffice.
If I haven't already done so, now is the time to book the hotel and flights. I make sure I have both hard copies and copies of these in the laptop so they don't get mixed up.